Ppp Mp Max-Bind - H3C MSR 20-20 Command Reference Manual

View
Parameter
Description
Related command:
Example

ppp mp max-bind

Syntax
View
Parameter
Virtual template interface view, dialer interface view
authentication: Performs MP binding according to PPP authentication username.
both: Performs MP binding according to both the PPP authentication username
and the endpoint descriptor.
descriptor: Performs the MP binding according to the endpoint descriptor.
Use the
ppp mp binding-mode
Use the
undo ppp mp binding-mode
binding mode.
By default, MP binding is based on both the PPP authentication username and the
endpoint descriptor.
The username is the peer's username received while performing PAP or CHAP
authentication. The endpoint descriptor, which uniquely specifies a device, refers
to the peer's endpoint descriptor received when performing LCP negotiation.
Based on the username or endpoint descriptor, the system can locate the specified
VT interface and create a MP binding according to the configuration on the
template.
Note that:
When MP binding is only based on descriptors, users cannot be differentiated.
■
So, to bind users to different groups, use the keyword both in the command.
When MP binding is only based on authentication usernames, peer devices
■
cannot be differentiated. So, when multiple peer devices exist, use the keyword
both in the command.
ppp mp user.
# Perform MP binding based on PPP authentication username.
<Sysname> system-view
[Sysname] interface dialer 0
[Sysname-Dialer0] ppp mp binding-mode authentication
ppp mp max-bind max-bind-num
undo ppp mp max-bind
Virtual template interface view, dialer interface view
max-bind-num: Specifies the maximum number of links which can be bound, in
the range 1 to 128.
command to set the MP binding mode.
command to restore the default MP
517