Interface Virtual-Template; Ip Address Ppp-Negotiate - H3C MSR 20-20 Command Reference Manual

508 C 31: PPP
HAPTER AND

interface virtual-template

Syntax
View
Parameter
Description
Example

ip address ppp-negotiate

Syntax
View
Parameter
Description
Related command:
Example
MP C C
ONFIGURATION OMMANDS
<Sysname> system-view
[Sysname] interface mp-group 3
[Sysname-Mp-group3]
interface virtual-ethernet number
undo interface virtual-ethernet number
System view
number: VT number, ranging from 0 to 1023.
Use the
interface virtual-template
Use the
undo interface virtual-template
To remove a VT, make sure that all the relevant VA interfaces are removed and the
VT is not being used.
# Create VT 10 interface.
<Sysname> system-view
[Sysname] interface virtual-template 10
[Sysname-Virtual-Template10]
ip address ppp-negotiate
undo ip address ppp-negotiate
Interface view
None
Use the
ip address ppp-negotiate
on the local interface, so that the local interface can accept the IP address
allocated by the remote end.
Use the
undo ip address ppp-negotiate
negotiation.
By default, IP address negotiation is disabled.
remote address, ppp ipcp remote-address forced.
# Configure the IP address of interface Serial 1/0 to be negotiable.
command to create a VT or enter VT view.
command to remove a VT.
command to enable IP address negotiation
command to disable IP address