Display Nat Vpn Limit - H3C S9500 Series Command Manual

Command Manual – NAT
H3C S9500 Series Routing Switches
Examples
# Display the statistics of the current NAT information.
<H3C> display nat statistics slot 3
Running information in slot 3:
active PAT session table count in CPU:0
active PAT session table count in NP:1
active NO-PAT session table count:0
active SERVER session table count:3
active STATIC NAT session table count: 11
Table 1-1 Description on the filed of the display nat statistics slot command
Running information in slot
active PAT session table count in CPU
active PAT session table count in NP
active NO-PAT session table count
active SERVER session table count
active STATIC NAT session table count
Note:
In PTA mode, hardware of S9500 series switches creates a positive stream and a
reversed stream (which is used for reversed PAT) when creating a stream. However,
the NAT log exports the positive stream only.

1.1.10 display nat vpn limit

Syntax
display nat vpn limit { all | public | vpn-instance vpn-name }
View
System view
Parameters
all: Queries the maximum number of users and connections of all the VPNs.
public: Queries the maximum number of users and connections of the public network.
Field
1-8
Chapter 1 NAT Configuration Commands
Description
Slot information
Number of NAPT entries in CPU
Number of NAPT entries in NP
Number of NAT entries in CPU
Number of user-configured internal
server entries
Number of static address translation
entries