User; Vpn-Instance - H3C MSR810 Command Reference Manual

user

Use user to configure the condition for the LAC to initiate tunneling requests.
Use undo user to restore the default.
Syntax
user { domain domain-name | fullusername user-name }
undo user
Default
No condition is configured for the LAC to initiate tunneling requests.
Views
L2TP group view
Predefined user roles
network-admin
Parameters
domain domain-name: Configures the LAC to initiate tunneling requests to the LNS when the
domain name of a u ser matches a configured domain name. The domain-name argument
represents the domain name of the user and is an case-sensitive string of 1 to 255 characters.
fullusername user-name: Configures the LAC to initiate tunneling requests to the LNS when the
username of a user matches a configured full username. The domain-name argument represents
the username of the user and is a case-sensitive string of 1 to 255 characters.
Usage guidelines
This command is available only on L2TP groups in LAC mode.
If you execute this command multiple times for an L2TP group, the most recent configuration takes
effect.
Examples
# Configure the LAC to initiate tunneling requests to the LNS when the username of the user
is test@aabbcc.net.
<Sysname> system-view
[Sysname] l2tp-group 1 mode lac
[Sysname-l2tp1] user fullusername test@aabbcc.net

vpn-instance

Use vpn-instance to assign a tunnel peer to a VPN.
Use undo vpn-instance to restore the default.
Syntax
vpn-instance vpn-instance-name
undo vpn-instance
Default
A tunnel peer belongs to the public network.
Views
L2TP group view
131