Advertisement
Table 2.10 Block Data Transfer Instructions
Instruction
Size
EEPMOV.B
EEPMOV.W
Function
if R4L ≠ 0 then
Repeat @ER5+ → @ER6+
R4L–1 → R4L
Until R4L = 0
else next;
if R4 ≠ 0 then
Repeat @ER5+ → @ER6+
R4–1 → R4
Until R4 = 0
else next;
Transfers a data block. Starting from the address set in ER5, transfers
data for the number of bytes set in R4L or R4 to the address location set
in ER6.
Execution of the next instruction begins as soon as the transfer is
completed.
Rev. 1.00 Mar. 12, 2008 Page 49 of 1178
REJ09B0403-0100
Section 2 CPU
Advertisement
