Advertisement
Section 21 Ethernet Controller Direct Memory Access Controller (E-DMAC)
(b)
Transmit Descriptor 1 (TD1)
TD1 specifies the transmit buffer length (maximum 64 kbytes).
Bit
Bit Name
31 to 16
TDL
15 to 0
(c)
Transmit Descriptor 2 (TD2)
TD2 specifies the 32-bit transmit buffer start address. The transmit buffer start address setting may
be on a byte, a word, or a longword boundary.
Rev. 1.00 Mar. 12, 2008 Page 820 of 1178
REJ09B0403-0100
Initial
value
R/W
Description
All 0
R/W
Transmit Buffer Data Length
These bits specify the valid transfer byte length in the
corresponding transmit buffer. If set to 0, the
operation is not guaranteed.
When the one frame/multi-buffer system is specified
(TFP1 and TF0 in TD0 = B'10 or B'00), the transfer
byte length specified in the descriptors at the start
and midway can be set in byte units.
All 0
R
Reserved
These bits are always read as 0. The initial value
should not be changed.
Advertisement
