Advertisement
Section 25 Flash Memory
(a)
Flash multipurpose address area parameter (FMPAR: general register ER1 of CPU)
This parameter stores the start address of the programming destination on the user MAT.
When the address in the area other than flash memory space is set, an error occurs.
The start address of the programming destination must be at the 128-byte boundary. If this
boundary condition is not satisfied, an error occurs. The error occurrence is indicated by the WA
bit (bit 1) in FPFR.
Initial
Bit
Bit Name
Value
31 to 0
MOA31 to
MOA0
(b)
Flash multipurpose data destination parameter (FMPDR: general register ER0 of
CPU):
This parameter stores the start address in the area which stores the data to be programmed in the
user MAT. When the storage destination of the program data is in flash memory, an error occurs.
The error occurrence is indicated by the WD bit in FPFR.
Initial
Bit
Bit Name
Value
31 to 0
MOD31 to
MOD0
(c)
Flash pass/fail parameter (FPFR: general register R0L of CPU)
This parameter indicates the return value of the program processing result.
Initial
Bit
Bit Name
Value
7
Rev. 1.00 Mar. 12, 2008 Page 942 of 1178
REJ09B0403-0100
R/W
Description
R/W
Store the start address of the programming destination
on the user MAT. The consecutive 128-byte
programming is executed starting from the specified start
address of the user MAT. Therefore, the specified
programming start address becomes a 128-byte
boundary and MOA6 to MOA0 are always 0.
R/W
Description
R/W
Store the start address of the area which stores the
program data for the user MAT. The consecutive 128-
byte data is programmed to the user MAT starting from
the specified start address.
R/W
Description
Unused
Return 0.
Advertisement
