Renesas H8S Family Hardware Manual page 718

Section 19 LPC Interface (LPC)
The following registers are necessary for SMIC mode
• SMIC flag register (SMICFLG)
• SMIC control/status register (SMICCSR)
• SMIC data register (SMICDTR)
• SMIC interrupt register 0 (SMICIR0)
• SMIC interrupt register 1 (SMICIR1)
The following registers are necessary for BT mode
• BT status register 0 (BTSR0)
• BT status register 1 (BTSR1)
• BT control/status register 0 (BTCSR0)
• BT control/status register 1 (BTCSR1)
• BT control register (BTCR)
• BT data buffer (BTDTR)
• BT interrupt mask register (BTIMSR)
• FIFO valid size register 0 (BTFVSR0)
• FIFO valid size register 1 (BTFVSR1)
Rev. 1.00 Mar. 12, 2008 Page 670 of 1178
REJ09B0403-0100