Voice Auto Attendant Command Set - ADTRAN AOS Version R10.1.0 Command Reference Manual

Command Reference Guide
V A A
OICE UTO
Auto attendant is a voice feature that allows callers to be automatically transferred to an extension without
any operator action. The commands in this section allow you to configure an auto attendant and to specify
which files the auto attendant will use, as well as to configure Session Initiation Protocol (SIP) parameters
so the auto attendant can be used in conjunction with system modes. For more information on configuring
the voice auto attendant, refer to the Configuring the Auto Attendant common application guide (article
number 1822) available online at https://supportforums.adtran.com.
To create an auto attendant and enter the Voice Auto Attendant Configuration mode, enter the voice
autoattendant <name> <extension> command at the Global Configuration mode prompt. For example:
>enable
#configure terminal
(config)#voice autoattendant Example 1212
(config-aa1212)#
The following commands are common to multiple command sets and are covered in a centralized section
of this guide. For more information, refer to the sections listed below:
alias "<text>" on page 66
cross-connect on page 67
description <text> on page 70
do on page 71
end on page 72
exit on page 73
interface on page 74
shutdown on page 82
All other commands for this command set are described in this section in alphabetical order.
entry-filename <name> on page 3779
sip-identity on page 3780
60000CRG0-35E
C
TTENDANT OMMAND
Copyright © 2012 ADTRAN, Inc.

Voice Auto Attendant Command Set

S
ET
3778