Table of Contents
Advertisement
Command Reference Guide
enrollment url <url>
Use the enrollment url command to specify the uniform resource locator (URL) of the certificate
authority (CA) to which AOS should send certificate requests. Use the no form of this command to remove
a URL.
Syntax Description
<url>
Default Values
No default values are necessary for this command.
Command History
Release 5.1
Functional Notes
When entering the URL, http:// is required followed by the IP address or domain naming system (DNS) of
the CA. If the port number is something other than 80, include it after the IP address or DNS name
separated with a colon (:).
The CA may have other necessary information to include in the common gateway interface (CGI) path
before ending with the actual CGI program. An example template to follow is
http://hostname:port/path/to/program.exe.
Use the default program pkiclient.exe without specifying it, end the URL with a slash (/). Otherwise, you
must enter the program name to use. For example, http://10.10.10.1:400/abcdefg/ will assume
pkiclient.exe as the program (but not including the terminating slash is a configuration error).
Specifying this command will override the enrollment terminal setting as described previously (refer to
enrollment terminal on page
Usage Examples
The following example specifies http://CAserver/certsrv/mscep/mscep.dll as the URL to which AOS will
send certificate requests:
(config)#crypto ca profile MyProfile
Configuring New CA Profile MyProfile
(ca-profile)#enrollment url http://CAserver/certsrv/mscep/mscep.dll
60000CRG0-35E
Specifies the certificate authority's URL (for example,
http://10.10.10.1:400/abcdefg/pkiclient.exe).
Command was introduced.
3903).
Copyright © 2012 ADTRAN, Inc.
CA Profile Command Set
3904
Advertisement
Table of Contents
