ADTRAN AOS Version R10.1.0 Command Reference Manual page 3751

Command Reference Guide
script <name>
Use the script command to create a FindMe-FollowMe action script for the user and to enter the script's
configuration mode. Use the no form of this command to remove the script from the user's
FindMe-FollowMe configuration.
Syntax Description
<name>
Default Values
By default, no FindMe-FollowMe action scripts are configured.
Command History
Release A4.01
Functional Notes
Each FindMe-FollowMe action script is the set of actions taken when FindMe-FollowMe is enabled and set
as the call coverage mode for the user. Action scripts are associated with FindMe-FollowMe contact
groups, and each group has one associated script. When the script command is entered from the user
account's configuration mode, you will enter the action script configuration mode. Each action script can
hold 10 actions.
For more information about enabling FindMe-FollowMe and specifying it as the call coverage mode for the
user, refer to the commands
information about contact group configuration, refer to
page 3852. For more information about action script configuration, refer to
Command Set on page
to the Configuring User Accounts on the NetVanta 7000 Series quick configuration guide available online
at https://supportforums.adtran.com.
Usage Examples
The following example creates the action script BUSINESS for user 4444, and enters the script's
configuration mode:
(config)#voice user 4444
(config-4444)#script BUSINESS
(config-4444-sc-BUSINESS)#
60000CRG0-35E
Specifies the name of the action script using no more than 10 characters.
Command was introduced.
findme-followme on page 3724
3844. For more information about configuring the FindMe-FollowMe feature, refer
Copyright © 2012 ADTRAN, Inc.
Voice User Account Command Set
and coverage on page
FindMe-FollowMe Contact Group Command Set on
FindMe-FollowMe Action Script
3711. For more
3751