Table of Contents
Advertisement
Command Reference Guide
enrollment retry
Use the enrollment retry command to determine how AOS handles certificate requests. Use the no form
of this command to return to the default setting. Variations of this command include:
enrollment retry count <number>
enrollment retry period <value>
Syntax Description
count <number>
period <value>
Default Values
By default, period is set to 5 minutes, and count is set to 12 retries.
Command History
Release 5.1
Usage Examples
The following example configures AOS to send certificate requests every 2 minutes, stopping after
50 retries (if no response is received):
(config)#crypto ca profile MyProfile
Configuring New CA Profile MyProfile
(ca-profile)#enrollment retry count 50
(ca-profile)#enrollment retry period 2
60000CRG0-35E
Specifies the number of times AOS re-sends a certificate request when it
does not receive a response from the previous request. Range is 1 to 100.
Specifies the time period between certificate request retries. The default is
1 minute between retries. Range is 1 to 60 minutes.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
CA Profile Command Set
3902
Advertisement
Table of Contents
