ADTRAN AOS Version R10.1.0 Command Reference Manual page 3812

Command Reference Guide
call-privilege
Use the call-privilege command to assign general call privileges for outbound access. This determines
what type of calls a user is permitted to make as a member of this class of service (CoS). Use the no form
of this command to remove general call privileges for outbound access. Variations of this command
include:
call-privilege 900-number
call-privilege all
call-privilege extensions
call-privilege international
call-privilege local
call-privilege long-distance
call-privilege operator-assisted
call-privilege specify-carrier
call-privilege toll-free
call-privilege [user1 | user2 | user3]
Syntax Description
900-number
all
extensions
international
local
long-distance
operator-assisted
specify-carrier
toll-free
user1
user2
user3
Default Values
By default, no call privileges are enabled.
Command History
Release 10.1
60000CRG0-35E
Permits 900 calls in the form 1-900-NXX-XXXX and 976-XXXX.
Permits all calls.
Permits internal calls.
Permits international calls in the form 011-number.
Permits local calls in the form NXX-XXXX.
Permits long distance calls in the form 1-NXX-NXX-XXXX.
Permits operator-assisted calls.
Permits calls that specify carrier.
Permits toll free calls.
Permits calls that match the first user-defined template.
Permits calls that match the second user-defined template.
Permits calls that match the third user-defined template.
Valid characters include:
0-9 - Any single digit.
X - Any single digit 0 through 9.
N - Any single digit 2 through 9.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Voice CoS Command Set
3812