Table of Contents
Advertisement
Command Reference Guide
forward-disconnect
Use the forward-disconnect command to specify the method of manipulating the polarity to signal a
disconnect of the line. Use the no form of this command to return to the default value. Variations of this
command include:
forward-disconnect battery none
forward-disconnect battery remove
forward-disconnect battery reverse
forward-disconnect delay <value>
Syntax Description
battery none
battery remove
battery reverse
delay <value>
Default Values
By default, forward-disconnect battery remove is enabled.
Command History
Release 9.3
Release A4.05
Usage Examples
The following example removes the battery upon disconnect for user 4444. This command is used most
often with a fax machine that needs to be alerted that a call has ended:
(config)#voice user 4444
(config-4444)#forward-disconnect battery remove
60000CRG0-35E
Specifies that the battery will not be removed or reversed upon disconnect.
Specifies that the battery will be removed upon disconnect.
Specifies that the battery will be reversed upon disconnect.
Sets a forward disconnect delay time value in milliseconds. Specify 250,
500, 750, 1000, or 2000 milliseconds.
Command was introduced.
Command was expanded to include the battery none parameter.
Copyright © 2012 ADTRAN, Inc.
Voice User Account Command Set
3727
Advertisement
Table of Contents
