Table of Contents
Advertisement
Command Reference Guide
CA Profile Command Set
enrollment terminal
Use the enrollment terminal command to specify manual (i.e., cut-and-paste) certificate enrollment. Use
the no form of this command to disable this feature.
Syntax Description
No subcommands.
Default Values
By default, this command is enabled.
Command History
Release 5.1
Command was introduced.
Functional Notes
This mode is overridden if the enrollment url command specifies the certificate authority (CA) to which
automatic certificate requests are to be sent via Simple Certificate Exchange Protocol (SCEP). Issuing an
enrollment terminal command after using the enrollment url command deletes the uniform resource
locator (URL) and forces the unit to use manual enrollment. Refer to
enrollment url <url> on page 3904
for
more information.
Usage Examples
The following example configures AOS to accept manual certificate enrollment input:
(config)#crypto ca profile MyProfile
Configuring New CA Profile MyProfile
(ca-profile)#enrollment terminal
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
3903
Advertisement
Table of Contents
