ADTRAN AOS Version R10.1.0 Command Reference Manual page 3806

Command Reference Guide Voice CODEC List Command Set
default
Use the default command to set the coder-decoder (CODEC) list as the default list for call negotiation on
the interface to which it is applied. Use the no form of this command to remove the CODEC list as the
default.
Syntax Description
No subcommands.
Default Values
No default values are necessary for this command.
Command History
Release 9.3 Command was introduced.
Usage Examples
The following example specifies the CODEC list List1 is used as the default list for call negotiation on the
interfaces to which the list is applied:
(config)#voice codec-list List1
(config-codec)#default
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 3806