Table of Contents
Advertisement
Command Reference Guide
Voice CoS Command Set
default-level
Use the default-level command to set this class of service (CoS) level as the default. When enabled, new
users that are added to the system are assigned this CoS by default. To change the default from this CoS
level, use the no form of this command.
Syntax Description
No subcommands.
Default Values
No default values are necessary for this command.
Command History
Release 10.1
Command was introduced.
Usage Examples
The following example sets the rule set set1 as the default CoS level:
(config)#voice class-of-service set1
Configuring Existing Level "set1".
(config-cos-set1)#default-level
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
3816
Advertisement
Table of Contents
