Table of Contents
Advertisement
Command Reference Guide
accept <template>
Use the accept command to specify a number pattern to match to a user ID and add the user to the Session
Initiation Protocol (SIP) Proxy user database. Once the accept entry is added to the proxy user template,
SIP messages are permitted and routed on the proxy server for the identified user. Use the no form of this
command to remove a configured template entry from the proxy user template.
AOS will process the reject patterns before the accept patterns, regardless of the order they
appear in the configuration of the proxy user template. Refer to
3872
for additional information.
Syntax Description
<template>
Default Values
No default values are necessary for this command.
Command History
Release A4.01
Functional Notes
The available wildcards for this command are:
0-9 = Match exact digit only.
X = Match any single digit 0 through 9.
N = Match any single digit 2 through 9.
M = Match any single digit 1 through 8.
$ = Match any number string dialed.
[ ] = Match any digit contained in the bracketed list (for example: [146] will match 1, 4, or 6).
Rules:
The following rules apply to the number templates.
1. Any open bracket must have a corresponding closing bracket to complete the statement.
2. Use only numbers inside brackets. Do not use dashes, spaces, wildcards, or other special characters
inside the brackets. Commas can be used in the brackets but are ignored.
3. Bracketed lists cannot be nested.
4. The $ wildcard can only be used as the last character in a template.
60000CRG0-35E
Specifies the patterns to match to a proxy user and allow the user as an
entry to the SIP Proxy user database. You can enter a complete phone
number, or use wildcards to define accepted numbers. Refer to Functional
Notes below for more information on using wildcards.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Proxy User Template Command Set
reject <template> on page
3866
Advertisement
Table of Contents
