ADTRAN AOS Version R10.1.0 Command Reference Manual page 3691

Command Reference Guide
rtp dtmf-relay
Use the rtp dtmf-relay command to configure the method by which Realtime Transport Protocol (RTP)
dual tone multi-frequency (DTMF) events are relayed. The dial digits can be sent inband or out-of-band
(OOB) of the voice stream. Use the no form of this command to return to the default value. Variations of
this command include:
rtp dtmf-relay inband
rtp dtmf-relay nte <value>
Syntax Description
inband
nte <value>
Default Values
By default, the rtp dtmf-relay is set for nte 101.
Command History
Release 9.3
Release A1
Usage Examples
The following example configures RTP DTMF relay events for inband:
(config)#voice loopback 5555
(config-LB-5555)#rtp dtmf-relay inband
60000CRG0-35E
Specifies that RTP DTMF events be relayed inband in the RTP stream.
Specifies that RTP DTMF event value be relayed OOB using named
telephone events (NTEs). Enter a named telephone event (NTE) value
between 96 and 127.
Command was introduced.
Command was included in the Voice Loopback Account Configuration
command set.
Copyright © 2012 ADTRAN, Inc.
Voice Loopback Account Command Set
3691