Command Reference Guide
Voice CoS Command Set
system-mode
Use the system-mode command to enable the system mode feature for this class of service (CoS). Once
enabled, users to whom this CoS is applied can activate different system modes on the unit via the
command line interface (CLI), special prefix (SPRE) codes, auto attendant, or the Web-based graphical
user interface (GUI). Use the no form of this command to disable this feature.
Syntax Description
No subcommands.
Default Values
By default, this command is disabled.
Command History
Release A1
Command was introduced.
Usage Examples
The following example enables the system mode feature for users with the applied CoS set1:
(config)#voice class-of-service set1
Configuring Existing Level "set1".
(config-cos-set1)#system-mode
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
3839