ADTRAN AOS Version R10.1.0 Command Reference Manual page 3849

Command Reference Guide
action <number> refer <extension>
Use the action <number> refer command to specify that FindMe-FollowMe refers an incoming call to
another user. Use the no form of this command to remove the action from the action script.
Syntax Description
<number>
<extension>
Default Values
By default, no action scripts are configured.
Command History
Release A4.01
Functional Notes
When a refer action is added to the action script, no other actions are performed after the refer. When a
FindMe-FollowMe call is referred to another user, the call no longer uses the FindMe-FollowMe action
script, but rather uses the call coverage configured for the user to which the call was referred.
Usage Examples
The following example specifies that the fifth and final action for the action script Business, in user 4444's
FindMe-FollowMe configuration, is to refer the call to user 1234. When the call is accepted by extension
1234, the call follows the call coverage configured for that user.
(config)#voice user 4444
(config-4444)#script Business
(config-4444-sc-Business)#action 5 refer 1234
60000CRG0-35E
Specifies the order number for the action. Valid range is 1 to 10.
Specifies the user extension to which the call is referred.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
FindMe-FollowMe Action Script Command Set
3849