Command Reference Guide
outbound-proxy
Use the outbound-proxy command to specify the IP address or host name of the device receiving
information from the voice quality monitoring (VQM) reporter before the information is sent to the
collector. This command allows you to configure additional devices to receive VQM reporters in addition
to a single collector. Using the no form of this command removes the outbound proxy server from the
VQM reporter configuration. Variations of this command include:
outbound-proxy primary <hostname | ip address>
outbound-proxy primary <hostname | ip address> tcp
outbound-proxy primary <hostname | ip address> tcp <port>
outbound-proxy primary <hostname | ip address> udp
outbound-proxy primary <hostname | ip address> udp <port>
outbound-proxy secondary <hostname | ip address>
outbound-proxy secondary <hostname | ip address> tcp
outbound-proxy secondary <hostname | ip address> tcp <port>
outbound-proxy secondary <hostname | ip address> udp
outbound-proxy secondary <hostname | ip address> udp <port>
Syntax Description
primary
secondary
<hostname | ip address>
tcp
udp
<port>
Default Values
By default, no server is configured. By default, the port used by both TCP and UDP is 5060.
Command History
Release A4.03
60000CRG0-35E
Specifies this outbound proxy server as the primary contact server for the
VQM reporter.
Specifies this outbound proxy server as the secondary contact server for the
VQM reporter.
Specifies the host name or IP address of the outbound proxy. IP addresses
should be expressed in the decimal dotted notation (for example,
10.10.10.1).
Optional. Specifies that the reporter and outbound proxy server
communicate using Transmission Control Protocol (TCP).
Optional. Specifies that the reporter and outbound proxy server
communicate using User Datagram Protocol (UDP).
Optional. Specifies the TCP or UDP port used for communication between
the reporter and the outbound proxy server. Range is 0 to 65535.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
VQM Reporter Command Set
3896
Need help?
Do you have a question about the AOS Version R10.1.0 and is the answer not in the manual?
Questions and answers