Voice User Account Command Set - ADTRAN AOS Version R10.1.0 Command Reference Manual

Command Reference Guide
V U A
OICE SER
Voice user accounts are used to define phone users that are registered to an AOS voice product. There are
three different types of user accounts: Session Initiation Protocol (SIP), analog, and virtual. SIP user
accounts are associated with a SIP user agent. Analog user accounts are user accounts that are associated
with a physical foreign exchange station (FXS) interface. Virtual user accounts are not associated with a
physical port. These user types can be used for special applications such as forwarding calls.
The commands in this section describe how to configure voice features for user accounts. For more
information about configuring voice users, refer to the configuration guide Configuring NetVanta 7100
User Accounts on the NetVanta 7000 Series (article number 1896) available online at
https://supportforums.adtran.com.
To create a user account and enter the Voice User Account Configuration mode, enter the voice user
command at the Global Configuration mode prompt. For example:
>enable
#configure terminal
(config)#voice user 4444
(config-4444)#
The following commands are common to multiple command sets and are covered in a centralized section
of this guide. For more information, refer to the sections listed below:
alias "<text>" on page 66
cross-connect on page 67
description <text> on page 70
do on page 71
exit on page 73
interface on page 74
All other commands for this command set are described in this section in alphabetical order.
alc on page 3700
block-caller-id on page 3701
busy-out alert-mode on page 3702
busy-out monitor track <name> on page 3703
caller-id-override on page 3704
call-waiting on page 3705
codec-group <name> on page 3706
connect on page 3707
contact-group <group number> on page 3708
cos on page 3709
coverage on page 3711
60000CRG0-35E
C
CCOUNT OMMAND
Copyright © 2012 ADTRAN, Inc.

Voice User Account Command Set

S
ET
3697