Table of Contents
Advertisement
Command Reference Guide
Voice CoS Command Set
pickup
Use the pickup command to enable the call pickup feature. If enabled, users with this voice class of service
(CoS) applied can enter a special prefix (SPRE) code or group extension to answer calls ringing on another
phone. Using the no form of this command disabled the call pickup feature on the CoS.
Syntax Description
No subcommands.
Default Values
By default, call pickup is disabled.
Command History
Release A4.01
Command was introduced.
Functional Notes
There are two types of call pickup available: directed call pickup and call pickup groups. Directed call
pickup allows a user to answer a ringing phone by dialing a SPRE code in addition to the phone's
extension. For example, using directed call pickup, a user would dial *528509 where *52 is the call pickup
SPRE code and 8509 is the ringing phone's extension. Call pickup groups allow the user to dial the group
extension to answer the ringing phone. For more information about configuring call pickup, refer to the
Configuring the Call Pickup Feature on AOS Voice Products quick configuration guide available online at
https://supportforums.adtran.com.
Usage Examples
The following example enables the call pickup feature in the CoS set1:
(config)#voice class-of-service set1
Configuring Existing Level "set1".
(config-cos-set1)#pickup
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
3831
Advertisement
Table of Contents
