Table of Contents
Advertisement
Command Reference Guide
FindMe-FollowMe Contact Group Command Set
digit-prompt
Use the digit-prompt command to enable dual tone multi-frequency (DTMF) digit prompting for the
FindMe-FollowMe contact group. When DTMF digit prompting is enabled, inbound callers can control the
incoming call using DTMF tones. When callers hear the prompt "To leave a voicemail at any time, press
1," they can then press 1 to leave a voicemail message. Using the no form of this command disables
DTMF digit prompting for the contact group.
Syntax Description
No subcommands.
Default Values
By default, DTMF digit prompting is disabled in FindMe-FollowMe.
Command History
Release A4.01
Command was introduced.
Functional Notes
To use DTMF digit prompting, enhanced FindMe-FollowMe must be enabled on the user account. Refer to
the command
findme-followme on page 3724
for more information.
Usage Examples
The following example enables DTMF digit prompting for contact group 2 in voice user 4444's
FindMe-FollowMe configuration:
(config)#voice user 4444
(config-4444)#contact-group 2
(config-4444-cg-2)#digit-prompt
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
3855
Advertisement
Table of Contents
