Voice Music On Hold Command Set - ADTRAN AOS Version R10.1.0 Command Reference Manual

Command Reference Guide
V M
OICE USIC ON
Music on hold (MOH) is a feature that allows the user to play hold music internally from a NetVanta 7000
Series unit rather than using an external music player. This feature replaces the CD player or other
hardware that would normally be required to generate hold music. The MOH feature can be used for hold
music, as well as for call queues and FindMe-FollowMe.
For more information about configuring MOH, refer to the quick configuration guide Configuring Music
on Hold on the NetVanta 7000 Series (article number 3418) available online at
https://supportforums.adtran.com.
To specify a MOH player and enter the Voice Music on Hold Configuration mode, enter the voice
music-on-hold player <name> command at the Global Configuration mode prompt. For example:
>enable
#configure terminal
(config)#voice music-on-hold player moh1
(config-moh1)#
The following commands are common to multiple command sets and are covered in a centralized section
of this guide. For more information, refer to the section listed below:
cross-connect on page 67
exit on page 73
All other commands for this command set are described in this section in alphabetical order:
default on page 3863
file <filename> on page 3864
60000CRG0-35E
H C
OLD OMMAND
Copyright © 2012 ADTRAN, Inc.

Voice Music on Hold Command Set

S
ET
3862