ADTRAN AOS Version R10.1.0 Command Reference Manual page 3692

Command Reference Guide
rtp frame-packetization <value>
Use the rtp frame-packetization command to configure the Realtime Transport Protocol (RTP) frame
packetization time in milliseconds for individual trunks and users. Use the no form of this command to
return to the default value.
Syntax Description
<value>
Default Values
By default, the rtp frame-packetization time is set to 20 milliseconds on all trunks and users.
Command History
Release 9.3
Release A1
Usage Examples
The following example sets the frame packetization time for loopback account 5555 to 10 milliseconds:
(config)#voice loopback 5555
(config-LB-5555)#rtp frame-packetization 10
60000CRG0-35E
Configures the RTP frame packetization time value in milliseconds. Select
from 10, 20, or 30 milliseconds.
Command was introduced.
Command was included in the Voice Loopback Account Configuration
command set.
Copyright © 2012 ADTRAN, Inc.
Voice Loopback Account Command Set
3692