ADTRAN AOS Version R10.1.0 Command Reference Manual page 3763

Command Reference Guide
t38 ced length <time>
Use the t38 ced length command to set the maximum duration of a regenerated called station identifier
(CED) signal, in milliseconds, from the digital signal processor (DSP) toward the time division
multiplexed (TDM) endpoint when a T.38 session is active. Using the no form of this command returns the
duration to the default value.
Syntax Description
<time>
Default Values
By default, the maximum duration of a regenerated CED signal is 3000 ms.
Command History
Release A5.01
Functional Notes
This command is only available on AOS voice products that have Freescale DSP. This includes the Total
Access 900(e) Series, the NetVanta 6310/6330 Series, and the NetVanta 7000 Series products.
This command is used to help in troubleshooting T.38 interoperability issues. This command should only
be issued by advanced users or at the direction of ADTRAN technical support.
Setting the maximum duration of a regenerated CED signal to 0 effectively prevents any CED generation.
Usage Examples
The following example decreases the maximum duration of the CED signal to 2000 ms for the T.38 session
for user 4444:
(config)#voice user 4444
(config-4444)#t38 ced length 2000
60000CRG0-35E
Specifies the maximum duration of a regenerated CED signal in
milliseconds. Valid range is 0 to 4000 ms.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Voice User Account Command Set
3763