Table of Contents
Advertisement
Command Reference Guide
certificate ca <serial number>
Use the certificate ca command to restore a certificate authority (CA) certificate. Use the no form of this
command to remove a specific certificate from the certificate chain for a CA.
Syntax Description
<serial number>
Default Values
No default values are necessary for this command.
Command History
Release 5.1
Functional Notes
The user typically does not enter this command. It is primarily used to restore certificates from the startup
configuration when the product is powered up.
Usage Examples
The following example removes the CA certificate with the serial number 0712:
(config)#crypto ca certificate chain MyProfile
(config-cert-chain)#no certificate ca 0712
60000CRG0-35E
Specifies the certificate's serial number (up to 51 characters). This value
can be found for existing certificates by using the show run command.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Certificate Command Set
3913
Advertisement
Table of Contents
