ADTRAN AOS Version R10.1.0 Command Reference Manual page 3910

Command Reference Guide
subject-name <name>
Use the subject-name command to specify the subject name used in the certificate request. Use the no
form of this command to remove a configured subject name.
Syntax Description
<name>
Default Values
By default, there is no subject name configured.
Command History
Release 5.1
Functional Notes
Configuring this setting simplifies the crypto ca enroll dialog, allowing you to enter the subject name only
once rather than every time you go through the enrollment process. Refer to
.
page 916
Usage Examples
The following example assigns a subject name of Adtran-cert to certificate requests:
(config)#crypto ca profile MyProfile
Configuring New CA Profile MyProfile
(ca-profile)#subject-name Adtran-cert
60000CRG0-35E
Specifies a subject name string using up to 256 characters entered in X.500
Lightweight Directory Access Protocol (LDAP) format.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
CA Profile Command Set
crypto ca enroll <name> on
3910