Command Reference Guide
set security-association idle-time <value>
Use the set security-association idle-time command to set the receive idle timeout in seconds. This is the
maximum amount of time for which the current virtual private network (VPN) peer can be idle. Once the
timeout has occurred, the VPN tunnel will be brought down. Use the no form of this command to disable
the timeout feature.
Syntax Description
<value>
Default Values
By default, the idle timeout is not defined.
Command History
Release 15.1
Usage Examples
The following example sets the receive idle timeout to 60 seconds:
(config)#crypto map MyMap 100 ipsec-ike
(config-crypto-map)#set security-association idle-time 60
60000CRG0-35E
Specifies the idle timeout in seconds. Valid range is 1 to 4294967294.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Crypto Map IKE Command Set
3930