ADTRAN AOS Version R10.1.0 Command Reference Manual page 3795

Command Reference Guide
prefix <characters>
Use the prefix command to define the characters that are pre-pended to calls coming into the call queue.
The prefix is displayed along with the calling number in the call queue member's caller ID. Use the no
version of this command to restore the system default.
Syntax Description
<characters>
Default Values
By default, AOS pre-pends CQ_ to all calls entering the call queue.
Command History
Release A4.01
Usage Examples
The following example sets the prefix for the call queue to TSQ:
(config)# voice queue 6407
(config-6407)#prefix TSQ
60000CRG0-35E
Specifies the characters to be prepended to queued calls.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Voice Call Queuing Command Set
3795