ADTRAN AOS Version R10.1.0 Command Reference Manual page 3714

Command Reference Guide
did <number>
Use the did command to configure direct inward dialing (DID) parameters for the extension. DID is used if
a service provider is providing digits to the unit on inbound calls or if the unit needs to provide DID
information to a piece of customer premises equipment (CPE). Use the no form of this command to disable
this feature.
Syntax Description
<number>
Default Values
No default values are necessary for this command.
Command History
Release 9.3
Usage Examples
The following example assigns a did number of 555-4560 to user 4444:
(config)#voice user 4444
(config-4444)#did 5554560
60000CRG0-35E
Specifies the DID number for the user.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Voice User Account Command Set
3714