ADTRAN AOS Version R10.1.0 Command Reference Manual page 3920

Command Reference Guide
ike-policy <number>
Use the ike-policy command to ensure that only a specified Internet key exchange (IKE) policy is used to
establish the IPSec tunnel. This prevents any mobile virtual private network (VPN) policies from using
IPSec policies that are configured for static VPN peer policies. Use the no form of this command to
remove a configured policy.
Syntax Description
<number>
Default Values
No default values are necessary for this command.
Command History
Release 6.1
Usage Examples
The following example sets the IKE policy 100 for crypto map MyMap:
(config)#crypto map MyMap 100 ipsec-ike
(config-crypto-map)#ike-policy 100
60000CRG0-35E
Specifies the policy number of the policy to assign to this crypto map.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Crypto Map IKE Command Set
3920