Table of Contents
Advertisement
Command Reference Guide
Voice CoS Command Set
block-caller-id
Use the block-caller-id command to conceal caller ID information for outbound calls. Use the no form of
this command to allow caller ID for outbound calls.
Syntax Description
No subcommands.
Default Values
By default, the block-caller-id feature is disabled.
Command History
Release 10.1
Command was introduced.
Usage Examples
The following example blocks caller ID for outbound calls in rule set set1:
(config)#voice class-of-service set1
Configuring Existing Level "set1".
(config-cos-set1)#block-caller-id
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
3811
Advertisement
Table of Contents
