ADTRAN AOS Version R10.1.0 Command Reference Manual page 3908

Command Reference Guide
password <password>
Use the password command to specify the challenge password for Simple Certificate Exchange Protocol
(SCEP). Use the no form of this command to allow certificate authority (CA) requests to be sent
automatically (using SCEP) without requiring a password.
Syntax Description
<password>
Default Values
By default, no password is required.
Command History
Release 5.1
Functional Notes
There are two places for configuring a SCEP password:
• At the (ca-profile)# prompt.
• If it is not configured at the (ca-profile)# prompt, you are prompted to enter one when going through the
certificate enrollment process.
The password is sent to the CA from which you are requesting a certificate. The CA may then ask for the
password later before a certificate can be revoked. Refer to
Usage Examples
The following example sets the SCEP challenge password to adtran:
(config)#crypto ca profile MyProfile
Configuring New CA Profile MyProfile
(ca-profile)#password adtran
60000CRG0-35E
Specifies the SCEP password (up to 80 characters).
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
CA Profile Command Set
crypto ca enroll <name> on page 916
.
3908