Table of Contents
Advertisement
Command Reference Guide
reverse-route
Use the reverse-route command to enable virtual private network (VPN) reverse route injection for a
particular crypto map. Use the no form of this command to disable reverse route injection. Variations of
this command include the following:
reverse-route
reverse-route <number>
reverse-route <number> tag <value>
reverse-route tag <value>
Syntax Description
<number>
tag <value>
Default Values
By default, reverse routing is disabled.
Command History
Release 15.1
Functional Notes
Reverse route injection automatically inserts a static route to a peer's remote network into the route table
of a VPN gateway.
The tags used in reverse route injection allow the routes to be individuated from other static routes.
Usage Examples
The following example enables reverse route injection for crypto map MyMap with an administrative
distance of 20 and a tag value of 10:
(config)#crypto map MyMap 100 ispec-ike
(config-crypto-map)#reverse-route 20 tag 10
60000CRG0-35E
Optional. Specifies the administrative distance for the static route. Range is
1 to 255.
Optional. Specifies that a tag will be added to the static route in the route
table. Range from 1 to 65535.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Crypto Map IKE Command Set
3925
Advertisement
Table of Contents
