Voicemail Cos Command Set - ADTRAN AOS Version R10.1.0 Command Reference Manual

Command Reference Guide
V C
OICEMAIL O
Class of service (CoS) defines the permissions available to a system user, and in this case defines
permissions as they relate to user voicemail. By default, users are not assigned a voicemail CoS. When a
user's account does not have an assigned voicemail CoS, the user will not have access to a voice mailbox.
The commands in this section help you to create a CoS specifically for voice mailboxes. The classes
created with these commands are then applied to users using the command
more information about configuring voicemail CoS and voicemail in general, refer to the NetVanta 7000
Series Voicemail quick configuration guide (article number 2198) available online at
https://supportforums.adtran.com.
To create a voicemail CoS and enter the Voicemail CoS Configuration mode, enter the voice mail
class-of-service command at the Global Configuration mode prompt. For example:
>enable
#configure terminal
(config)#voice mail class-of-service class1
Configuring Existing Level "class1".
(config-vm-class1)#
The following commands are common to multiple command sets and are covered in a centralized section
of this guide. For more information, refer to the sections listed below:
do on page 71
exit on page 73
interface on page 74
All other commands for this command set are described in this section in alphabetical order.
default-level on page 3877
expire-time <days> on page 3878
greeting-length-max <time> on page 3879
greeting-quota <time> on page 3880
message-length-max <time> on page 3881
message-quota <time> on page 3882
prompt-delete on page 3883
rename <name> on page 3884
60000CRG0-35E
S C S
OMMAND
Copyright © 2012 ADTRAN, Inc.
ET

Voicemail CoS Command Set

voicemail on page 3773. For
3876