ADTRAN AOS Version R10.1.0 Command Reference Manual page 3874

Command Reference Guide Proxy User Template Command Set
routeback-rejection
Use the routeback-rejection command to specify that during failover the proxy user template should not be
used if the Contact header matches the template's target. Use the no form of this command to disable
routeback rejection.
Syntax Description
No subcommands.
Default Values
By default, routeback-rejection is disabled.
Command History
Release A5.01 Command was introduced.
Usage Examples
The following example enables routeback rejection for proxy user template Set1:
(config)#ip sip proxy user-template Set1
(config-template-Set1)#routeback-rejection
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 3874