ADTRAN AOS Version R10.1.0 Command Reference Manual page 3782

Command Reference Guide
call-distribution
Use the call-distribution command to specify the manner in which queued calls are distributed to
members of the call queue. Use the no version of this command to restore the default.
Syntax Description
linear-hunt
most-idle-agent
ring-all
Default Values
By default, all members of the call queue will be called simultaneously.
Command History
Release A5.01
Usage Examples
The following example configures the call-distrubtion as most-idle-agent:
(config)# voice queue 6407
(config-6407)# call-distribution most-idle-agent
60000CRG0-35E
Specifies that members of the call queue will be called in a linear,
progressive fashion based on the foreign exchange service (fxs) port to
which the queue member is connected.
Specifies that the member of the call queue who has not been on a call
queue phone call for the longest duration of time will be called. Calls that
end before the call queue greeting is played are not count as calls for the
distribution list.
Specifies that all members of the call queue will be called simultaneously.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Voice Call Queuing Command Set
3782