ADTRAN AOS Version R10.1.0 Command Reference Manual page 3906

Command Reference Guide
ip-address <ipv4 address>
Use the ip-address command to specify an Internet Protocol version 4 (IPv4) address to be included in the
certificate requests. Use the no form of this command to remove a defined IPv4 address.
Syntax Description
<ipv4 address>
Default Values
No default values are necessary for this command.
Command History
Release 5.1
Functional Notes
Configuring this setting simplifies the crypto ca enroll dialog, allowing you to enter the IPv4 address only
once rather than every time you go through the enrollment process. Refer to
.
page 916
Usage Examples
The following example specifies 66.203.52.193 as the IPv4 address to be sent in certificate requests:
(config)#crypto ca profile MyProfile
Configuring New CA Profile MyProfile
(ca-profile)#ip-address 66.203.52.193
60000CRG0-35E
Specifies a valid IPv4 address. IPv4 addresses should be expressed in
dotted decimal notation (for example, 10.10.10.1).
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
CA Profile Command Set
crypto ca enroll <name> on
3906