ADTRAN AOS Version R10.1.0 Command Reference Manual page 3912

Command Reference Guide
certificate <serial number>
Use the certificate command to restore a certificate. Use the no form of this command to remove a specific
certificate from the certificate chain.
Syntax Description
<serial number>
Default Values
No default values are necessary for this command.
Command History
Release 5.1
Functional Notes
The user typically does not enter this command. It is primarily used to restore certificates from the startup
configuration when the product is powered up.
Usage Examples
The following example removes the certificate with the serial number
73f0bfe5ed8391a54d1214390a36cee7:
(config)#crypto ca certificate chain MyProfile
(config-cert-chain)#no certificate 73f0bfe5ed8391a54d1214390a36cee7
60000CRG0-35E
Specifies the certificate's serial number (up to 51 characters). This value
can be found for existing certificates by using the show run command.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Certificate Command Set
3912