ADTRAN AOS Version R10.1.0 Command Reference Manual page 3724

Command Reference Guide
findme-followme
Use the findme-followme command to enable the FindMe-FollowMe feature for the user. Use the no form
of this command to disable the feature. Variations of this command include:
findme-followme
findme-followme enhanced
Syntax Description
enhanced
Default Values
By default, FindMe-FollowMe is disabled.
Command History
Release A4.01
Functional Notes
The enhanced version of FindMe-FollowMe allows the AOS device to remain in the talk path only for
external calls with press-to-accept enabled.
FindMe-FollowMe is a complex feature requiring a large amount of system resources.
Decreasing the amount of enhanced FindMe-FollowMe can reduce the amount of system
resources used by the feature.
This command must be enabled on the user account for additional FindMe-FollowMe configurations. For
more information about configuring the FindMe-FollowMe feature, refer to
Group Command Set on page 3852
the Configuring User Accounts for the NetVanta 7000 Series quick configuration guide available online at
https://supportforums.adtran.com.
Usage Examples
The following example enables the basic FindMe-FollowMe feature for voice user 4444:
(config)#voice user 4444
(config-4444)#findme-followme
60000CRG0-35E
Optional. Specifies that the enhanced version of FindMe-FollowMe is
enabled on the user account.
Command was introduced.
and FindMe-FollowMe Action Script Command Set on page
Copyright © 2012 ADTRAN, Inc.
Voice User Account Command Set
FindMe-FollowMe Contact
3844, or
3724