Command Reference Guide
Voice CoS Command Set
park
Use the park command to allow users to park calls on the system. Use the no form of this command to
disable the call parking feature.
Syntax Description
No subcommands.
Default Values
By default, the parking feature is enabled.
Command History
Release 11.1
Command was introduced.
Usage Examples
The following example allows users to park calls in rule set set1:
(config)#voice class-of-service set1
Configuring Existing Level "set1".
(config-cos-set1)#park
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
3829