Command Reference Guide
Voice CoS Command Set
transfer
Use the transfer command to allow users to perform call transfers. Use the no form of this command to
disable call transfers.
Syntax Description
No subcommands.
Default Values
By default, the call transfer feature is disabled.
Command History
Release 11.1
Command was introduced.
Usage Examples
The following example allows users in rule set set1 to perform call transfers:
(config)#voice class-of-service set1
Configuring Existing Level "set1".
(config-cos-set1)#transfer
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
3841