Command Reference Guide
collector
Use the collector command to specify the IP address or host name of the server that will be receiving
information from the voice quality monitoring (VQM) reporter. Use the no form of this command to
remove the server from the reporter's configuration. Variations of this command include:
collector primary <hostname | ip address>
collector primary <hostname | ip address> tcp
collector primary <hostname | ip address> tcp <port>
collector primary <hostname | ip address> udp
collector primary <hostname | ip address> udp <port>
collector secondary <hostname | ip address>
collector secondary <hostname | ip address> tcp
collector secondary <hostname | ip address> tcp <port>
collector secondary <hostname | ip address> udp
collector secondary <hostname | ip address> udp <port>
Syntax Description
primary
secondary
<hostname | ip address>
tcp
udp
<port>
Default Values
By default, no server is configured.
Command History
Release 17.6
60000CRG0-35E
Specifies that the server is the primary contact server for the VQM reporter.
Specifies that the server is the secondary contact server for the VQM
reporter.
Specifies the host name or IP address of the server. IP addresses should be
expressed in the decimal dotted notation (for example, 10.10.10.1).
Optional. Specifies that the reporter and server communicate using
Transmission Control Protocol (TCP).
Optional. Specifies that the reporter and server communicate using User
Datagram Protocol (UDP).
Optional. Specifies the TCP or UDP port used for communication between
the reporter and the server. Range is 0 to 65535.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
VQM Reporter Command Set
3886