ADTRAN AOS Version R10.1.0 Command Reference Manual page 3843

Command Reference Guide Voice CoS Command Set
user-speed
Use the user-speed command to allow users to program speed dial numbers. Use the no form of this
command to deny this privilege.
Syntax Description
No subcommands.
Default Values
By default, user speed dial programming is not allowed.
Command History
Release 11.1 Command was introduced.
Usage Examples
The following example allows users in rule set set1 to program speed dial numbers:
(config)#voice class-of-service set1
Configuring Existing Level "set1".
(config-cos-set1)#user-speed
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 3843