Table of Contents
Advertisement
Command Reference Guide
Voice CoS Command Set
program-user-speed
Use the program-user-speed command to allow users to access speed dial functionality through the
system. Use the no form of this command to disable the speed dialing feature.
Syntax Description
No subcommands.
Default Values
By default, the speed dial feature is disabled.
Command History
Release 11.1
Command was introduced.
Usage Examples
The following example enables the speed dial feature for users in rule set set1:
(config)#voice class-of-service set1
Configuring Existing Level "set1".
(config-cos-set1)#program-user-speed
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
3832
Advertisement
Table of Contents
