Table of Contents
Advertisement
Command Reference Guide
set transform-set
Use the set transform-set command to assign up to six transform sets to a crypto map. Use the no form of
this command to return to the default setting. Refer to
on page 927
for information on defining transform sets. Variations of this command include:
set transform-set <name>
set transform-set <name> <name>
set transform-set <name> <name> <name>
set transform-set <name> <name> <name> <name>
set transform-set <name> <name> <name> <name> <name>
set transform-set <name> <name> <name> <name> <name> <name>
Syntax Description
<name>
Default Values
By default, there is no transform set assigned to the crypto map.
Command History
Release 4.1
Functional Notes
Crypto map entries do not directly contain the transform configuration for securing data. Instead, the crypto
map is associated with transform sets that contain specific security algorithms (refer to
transform-set <name> <parameters> on page
If no transform set is configured for a crypto map, then the entry is incomplete and will have no effect on
the system.
Usage Examples
The following example first creates a transform set (Set1) consisting of two security algorithms (up to three
may be defined), and then assigns the transform set to a crypto map (MyMap):
(config)#crypto ipsec transform-set Set1 esp-3des esp-sha-hmac
(cfg-crypto-trans)#exit
(config)#crypto map MyMap 100 ipsec-ike
(config-crypto-map)#set transform-set Set1
60000CRG0-35E
Assigns up to six transform sets to this crypto map by listing the set names,
separated by a space.
Command was introduced.
927).
Copyright © 2012 ADTRAN, Inc.
Crypto Map IKE Command Set
crypto ipsec transform-set <name> <parameters>
crypto ipsec
3932
Advertisement
Table of Contents
