ADTRAN AOS Version R10.1.0 Command Reference Manual page 3818

Command Reference Guide Voice CoS Command Set
disable-callwaiting
Use the disable-callwaiting command to allow users to control the call waiting feature. Disabling call
waiting will block the alert of an incoming call while the user is on the phone. Use the no form of this
command to enable call waiting.
Syntax Description
No subcommands.
Default Values
By default, call waiting is enabled.
Command History
Release 10.1 Command was introduced.
Usage Examples
The following example allows users in rule set set1 to disable call waiting:
(config)#voice class-of-service set1
Configuring Existing Level "set1".
(config-cos-set1)#disable-callwaiting
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 3818